Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: BlackMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 % Precautions: 1. Storage1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it’s not UV light)2) It’s endorsed to store the resin under 15C -35C in a sealed container. Keep away from any dusty or moist environment. 2.Usage:1) Shake well before use. Keep away from any direct sunlight all over usage. 2) Do not put in the mouth. Keep it away from the children.3) Wear gloves before use to Keep away from direct contact with the skin and keep the room ventilated.4) For accidently contact, please wash by numerous water immediately. Are seeking medical advice if necessary.5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. 3. DLP printer how to make a choice corresponding UV resin.Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We would possibly not responsible for any damages caused by improper use of the resin.
Specifically designed for led light source to reach better printing quality
Rapid prototyping. The resin has been developed to reduce the forming time
Strong adhesion. The adhesion has been improved for higher print success rate
Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT014 and fine printing details
Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment