Anycubic Upgraded Full Metal i3 Mega 3D Printer –UltraBase Version
1. Please check all of the wires if are loose before starting it because of the long transportation.
2. The power source have both 110v and 220v, please make sure power supply is correct setting.
3. Before start your printing you want to calibrate the build bed properly according to the use manual.
4. The Z level, extruder and bed temperature needed to be adjusted a bit depending on the material printed.
5. Follow the instruction of manual on inserting filament to reduce clogging issues, even supposing we provide a tool for nozzle cleaning and atomic pulls inside.
6. Be careful the hot surface all over operation, only remove the print models when the bed cooling.
7. Will have to notice the distance, never let the nozzle directly rub against the ultrabase.
8. Cleaning the parts and build platform, use diluted alcohol reasonably than isopropanol, or the coating started coming off the center.
Printing Technology: FDM (Fused Deposition Modeling)
Print Speed: 20~100mm/s (Recommended Speed 60)
Commute Speed: 100mm/s
Nozzle Diameter: 0.4 mm
Beef up Print Materials: PLA, ABS, HIPS, WOOD
Operational Print Bed Temperature: 110oC
Operational Extruder Temperature: max 260oC
Ambient Operating Temperature: 8oC – 40oC
Leveling Type: Manual Leveling
Input Formats: .STL, OBJ, .DAE, .AMF
Slicer Software: Cura
Cura Output Formats: G-Code
Connectivity: SD Card & USB support
Input Rating: 100-240V AC, 50/60Hz, 1.5A
Printer Dimensions: 405 x 410 x 453mm
Package Weight: 15kg
CE, FCC, RoHS ,EN
1x I3 Mega
1x 8G SD Card
1x User Manual
1x PLA filament ( 1Kg )
1x Tool Set
※ Printing Volume: 8.27 x 8.27 x 8.07 inch(210 x 210 x 205 mm)
※ Easy-to-follow Assembly: Complete the assembling with 8 screws ,start to printing through a 3.5-inch TFT touch screen.
※ ANYCUBIC UltraBase: Patented heat bed, super adhesion, smoothy lattice bottom surface. Easier to take off model by hands, no need masking tape and glue stickers any further.
※ Filament Detection: Automatic printing pause when filament runs out, resume after filament re-load with just one click.
※ Anycubic Advantage: The entry-level 3D printer with one year warranty and lifelong technecial Beef up, superior than one could expect from such a budget priced machine!