WARNING! Springs included in this bundle are for CR-10 series printers and are 5mm longer than Ender series springs. HOWEVER they are compatible with Ender series printers. You may need to raise the z-axis limit switch by 4-6mm to accommodate for the longer length. These 6 heavy duty springs provide much more resistance and will hold the bed level much longer than your stock printer springs. This ensures more consistent results, higher print quality and less time leveling the bed between prints.
This Easy upgrade kit from Capricorn, F1rst Layer, and Creality is designed to be a very simple and affordable kit designed to make the biggest difference in print quality with minimal spending. These products together will help to make the printer easier to use, more accurate, and support print quality concurrently ensuring reliability from the first hour of installation to thousands of printing hours later. Capricorn PTFE is a well known and best in class PTFE tubing with high manufacturing tolerances that ensure consistency in printing with a Bowden style printer. F1rst Layer PC4-M6 and PC4-M10 fittings have been relentlessly tested to ensure the teeth in the fitting grasp the tubing firmly and never slip even after thousands of hours of printing and use. The upgraded Creality springs will help to hold a more firm and level bed for longer. All of these products together help to support accuracy, reliability, consistency, and print quality without costing too much money. F1rst Layer is a driven brand in the 3D printer space and we are heavily focused on customer satisfaction and reinforce. If you have any questions about our products, please contact us and We will be able to be happy to speak with you 24/7.
This is a basic upgrade kit complete with the most affordable and useful upgrades available for Creality printers. Capricorn, F1rst Layer, and Creality have teamed up to put the highest quality products together to make a product for beginners all the way to experienced hobbyists. This kit is designed to give the most improved performance imaginable without any complicated installation process or alterations to the printer itself.
Capricorn PTFE XS series Teflon tubing is designed to resist the high heats of 3D printing whilst avoiding any dangerous off-gassing which other brands may be susceptible to. The tolerance of the inner diameter of the Capricorn PTFE tubing is also much tighter, which allows for more accurate feeding and retraction movements when compared to a stock PTFE tube. This product will help support print quality and make your 3D printer easier to use and tune.
F1rst Layer has compared and tested dozens of samples of pneumatic fittings to find the highest quality fittings available on the market. Both the PC4-M6 and PC4-M10, are one of the best available and two of each are provided in every upgrade kit. The metal teeth grasp the PTFE tubing tightly and prevent it from slipping in any direction. The metal teeth on F1rst Layer fittings as well as the top quality of the fittings ensures that these fittings work flawlessly on every print for many years
Creality CR-10 springs included in this kit are much stronger than the stock ender 3 springs, and should provide a much sturdier build surface that can negate and residual motion from fast direction changes on the Y axis. These springs should also hold a level for a longer period of time as opposed to the stock ender 3 springs that come with the printer. These springs are a couple mm longer and as such, the Z axis end stop may need to be slightly raised depending on where you have it installed.
F1rst Layer is committed to customer satisfaction and improving our range of products every day. We provide 24/7 customer reinforce for every product we offer. Please do not hesitate to contact us if you have any questions or concerns about any of the products we have on offer. We will be able to do everything we will be able to to have your printer consistently running at its full potential for so long as imaginable.