Authentic Creality All Metal Hotend Complete Upgrade Kit with Capricorn PTFE Bowden Tubing, Titanium Heat Break…

Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!
The Titanium heatsink and Aluminum heat block allow for SAFE printing at all temperatures as opposed to the stock Creality hotends where the PTFE meets the very hot nozzle in the heat block. Perfect for materials such as Nylon, Carbon Fiber, and other exotic materials because the PTFE is a safe distance away from the hotend which prevents dangerous off-gassing.
The perfect replacement kit if the your stock hotend has failed or constantly jams. An intelligent and engineered design ensures the best operational use to provide noticable improvements over the cheap stock option for the Ender 3. Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated. Zip ties are also included for tidy cable management.

Description

F1rst Layer is proud to bring you the first fully plug and play drop in all metal drop in upgrade kit ever to be had for the Ender 3, Ender 3 Pro, or Ender 5 and all other 24V printers. If your printer is 12V, simply swap the included 24V heating element with the 12V equivalent and you’re ready for installation. This hotend is hand machined from solid titanium and Aluminum for the best imaginable performance and longevity. The 4 stainless steel hotend nozzles give a couple of options for higher detail prints and fast draft style prints at larger layer heights.
NOTICE: This kit contains a hotend with a titanium heat sink which has superior thermal dissipation qualities when compared to the steel heat sinks on stock 3D printers. This may require editing the firmware on the printer in the section called PID. Editing the PID once the new hotend is installed will guarantee accurate temperatures and extrusion.
This kit also contains stainless steel hotend nozzles which also have different thermal conductivity properties compared to brass nozzles and this may require the user to raise the temperature for more consistent extrusion when the usage of some filaments.
Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!
The Titanium heatsink and Aluminum heat block allow for SAFE printing at all temperatures as opposed to the stock Creality hotends where the PTFE meets the very hot nozzle in the heat block. Perfect for materials such as Nylon, Carbon Fiber, and other exotic materials because the PTFE is a protected distance away from the hotend which prevents dangerous off-gassing.
The easiest replacement kit if the your stock hotend has failed or constantly jams. An intelligent and engineered design ensures the best operational use to provide noticable improvements over the cheap stock option for the Ender 3. Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated. Zip ties are also included for tidy cable management.
Not just for the Ender 3. This hotend kit will fit on the Ender 3 Pro, Ender 5, CR-10, CR-10S, CR-10S 4/5, CR-10 Mini, GeeTech A-10, Tevo Tornado, Anet Printers, Tronxxy-XY. PLEASE NOTE: Some printers may need minor modifications or extra assembly such as splicing wires for the heating element for complete functionality from this whole kit. PTFE tubing is cut to 40cm.
This can be a “drop in” complete kit for the Creality Ender 3 or Ender 3 Pro with an authentic Creality all metal hotend, 24V heating element, thermistor, hotend sock, and 4 steel nozzles (1 x 0.2mm, 2 x 0.4mm, 1 x 0.6mm) for long lasting quality. All parts manufactured specifically to be used in Creality machines and similar open source model printers. Quality hotend sock provides a a lot more stable temperatures for the most consistent printing results with filaments such as PETG, ABS, and even Nylon!

Additional information

Brand

Label

Manufacturer

MPN

Package Dimensions

Part Number

Product Group

Product Type Name

Publisher

Studio