WARNING – Springs included in this bundle are stiffer and sturdier than the stock bed springs on all ender series printers. The spring sizes also differ from the stock springs in length by roughly 5mm. to be able to install the new springs, you may want to raise the z-axis limit switch by 4-6mm to accommodate for the longer length of these sturdier springs. This bundle is a will have to have for new printer owners and experienced hobbyists alike. Combined, the parts in this bundle will allow more accurate printing at higher speeds, higher print quality results as well as fewer failures, better performance on retraction, and more consistent extrusion. These are one of the vital most common parts consumers look to strengthen upon with their printer and F1rst Layer is happy to bundle all of these products in the same convenient one time purchase upgrade package. This bundle includes 1 aluminum extruder, 1 meter of Capricorn PTFE bowden tubing, 6 bed springs, 1 collet clip and 4 pneumatic fittings for all Creality printers.
F1rst Layer has assembled a collection of prime quality upgraded parts to pair with your Ender series printer. Bringing together the best from large 3D printing brands such as Capricorn and Creality as well as our own prime quality parts to verify your machines runs as well as it possibly can. After installing the entire pieces in this bundle, you’ll expect more consistent and accurate feed rates, better results with retraction settings, less failures, and a bed that holds level much longer.
The Capricorn XS Series tubing in this collection is for 1.75mm filament and rated for higher temperature usage than cheaper PTFE alternatives. The inner diameter tolerances are much tighter than competitors in the space and lead to much better performance in all Bowden style printers that use it. Capricorn is the most trusted name in PTFE tubing.
The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear much better than the stock 3D printers plastic extruders today. The full installation kit for the extruder is included and it is very easy and straightforward to switch to this upgraded part on your machine.
The F1rst Layer PC4-M10 and PC4-M6 stainless steel pneumatic fittings are top of the line fittings with metal teeth inside that will grasp the PTFE tubing ensuring that it doesn’t slip as the filament is pushed in or retracted out. We have also included a collet clip which is used with the fitting on the hotend to be sure that it never slips on the PTFE after extended use.
Springs included in this bundle are for CR-10 series printers and are 5mm longer than Ender series springs. HOWEVER they are compatible with Ender series printers. You may want to raise the z-axis limit switch by 4-6mm to accommodate for the longer length. These 6 heavy duty springs provide much more resistance and will hold the bed level much longer than your stock printer springs. This ensures more consistent results, higher print quality and less time leveling the bed between prints.