Aiming at the problems exist at the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a new product, MKS Gen L, which provides more flexible choices for users.
1.Make sure positive and negative connection is all right before powering.
2.No plugging and disposing of the drivers and motors when powering, in a different way it’s going to easily burn the drivers.
3.No adjusting the driver current when the motors are running.
MKS GEN L Board1*1
Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
Use high-quality 4 layer PCB&Use special power chip,Toughen 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it could possibly replace Ramps1.4 straight away
Toughen numerous stepper drivers:4988,8825,TMC2208 and TMC2100, and To be had to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & To be had to connect external large stepp drivers
Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces