Genuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)

Amazon.com Price: $9.93 (as of 26/09/2022 19:04 PST- Details) & FREE Shipping.

Genuine E3D Parts
ONLY works for HotEnds which use the E3D V6 style heater block
3 Pack of original high temperature non-stick silicone socks for E3D V6 HotEnds

Description

A pack of 3 original high temperature non-stick silicone socks for E3D V6 and other HotEnds also the use of the E3D V6 style heater block with thermistor cartridges.

Not sure about this design? E3D is confident that the new-style socks will suit almost all customers, but E3D kept this design to be had for specific use-cases. In particular, these socks may be preferable in set-ups where keeping the heater block AND nozzle fully insulated are desirable. We recommend the use of these socks with our 0.15mm nozzles.

These socks will keep your nozzle clean and free of burnt on blackened plastic. They do not just keep the nozzle clean, but also keep heat inside the hotend, and off the print.

Made of a heat-resistant, non-stick silicone material our will repel build-up of molten plastic. This in point of fact helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.

These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print in point of fact boost the ability to print great overhangs and bridges, all even as keeping the hotend temperature extremely stable.

The covers simply push onto the front of the hotend with no disassembly – they’re going to be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm.


These v6 socks are a pack of 3 because They do not last perpetually. Depending on what materials you print and what kind of abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they must easily last 100+ print hours. With materials like ABS and gentler use you’ll get almost infinite life. Mileage may vary.

Genuine E3D Parts
ONLY works for HotEnds which use the E3D V6 style heater block
3 Pack of original high temperature non-stick silicone socks for E3D V6 HotEnds
These socks will keep your nozzle clean
These socks in point of fact helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles

Additional information

Brand

EAN

EAN List

Item Dimensions

Label

Legal Disclaimer

Manufacturer

MPN

Number Of Items

Package Dimensions

Part Number

Product Group

Product Type Name

Publisher

Studio

UPC

UPC List