New MKS Gen-L V1.0 3D Printer Controller Board Relacement Ramps 1.4 Mega 2560 R3

Model: MKS Gen-L V1.0
Plug the driver according to the different color terminals,to avoid the damage caused by the reversed connection.
Please do not insert or pull the motor and driver under the condition of power-on, which may cause the driver to burn out. Also do not adjust the current during the operation of the motor.

Description

Mega 2560 & Ramps 1.4 are integrated in the board,which designed to avoid complicated connections.
Support motor drivers such as 4988,8825,TMC2100.and to be had to change the driver as they like.
Reserved external driver signal,to be had to connect an external high-current driver to drive the 57,86 motor.
Use prime quality MOSFET tube,better cooling and more stable.
Use special power chip,beef up 12-24V input,to solve the problems of chip heating and power shortage.
Stable and reliable filter circuit reduces the potential for interference,and avoids crashes as imaginable in the process of printing.
Use CH340 serial port chip,more easily to install the driver than 16U2.
Run Marlin firmware,and to be had to directly replace the Ramps 1.4.
Support direct connection of 2004LCD,12864LCD,TFT28 and TFT32.
XTZ axis with different color terminal controls the motors and endstops,which is convenient to wire.

You will get:
1x MKS Gen-L V1.0 3D Printer Controller Board.
1x USB Cable.
Model: MKS Gen-L V1.0
Plug the driver according to the different color terminals,to avoid the damage caused by the reversed connection.
Please do not insert or pull the motor and driver under the condition of power-on, which may cause the driver to burn out. Also do not adjust the current all through the operation of the motor.
You want first disconnect the power, remove the motor, and then re-power, adjust the potentiometer, measure the voltage on the potentiometer until the measured voltage is equal to expected. Do not insert the reverse drive, differently it is going to burn out the drive and even burn the motherboard.
Motor driver is NOT included in this product.

Additional information

Binding

Brand

EAN

EAN List

Label

Manufacturer

MPN

Package Dimensions

Part Number

Product Group

Product Type Name

Publisher

Studio

UPC

UPC List