How to use Sparkmaker:
Step1:Add model to SparkStudio to add toughen and slice
Step2:Save the slice file to SD card.
Step3:Level platform when first print (No wish to level again next time).
Step4:Loosen the four screws on both sides of the platform.
Step5:Rotate the knob drops the platform to the lowest point
Step6:Press down the platform and tighten the four screws on both sides of the platform.
Step7:Pour the resin into resin tank(Less than 120g resin)
Step8:Insert the SD card into the slot (Face down).
Step9:Press the button and start to print
Step10:The print is finished.
Step11:Loosen the take care of and remove the platform
Step12:Remove the supports of model
Step13:Clean the model with 99% alcohol
Step14:Irradiate the model with UV-light about 2-3mins.（purchased one after the other）
Step15:After all,get the model.
How to Clean the Machine?
The edge of the building platform can be cleaned the usage of tissue or dust cloth and residual adhesive can be removed with a knife or spade and the residual adhesive in the tank must be removed with tweezers. The remaining resin can be absorbed the usage of a syringe and stored in a bottle for next use. Loosen the two screws used to install resin tank and clean the tank with alcohol, and then reinstall it.
Matters needing attention:
1.※When connecting the printer,You must plug in the DC port first,and then plug in the socket.
2.The SparkMaker 3D Printer must put in a place without strong light.
3.UV cover must be put on the SparkMaker Printer when printing.
4.The SD card’s capacity must not more than 32G and must be formatting when first use.
5.Avoid looking at UV light and you must wear goggles.
KINDLY REFER USER MANUAL BEFORE USE.
DESKTOP DESIGN: Only 6.6 pounds with a compact size of 170φ*275mm, Featuring a small footprint. Suitable for office, studio or home.
READY TO PRINT: Unlike most other 3D printers, fully assembled and has already been calibrated at the factory. You’ll be able to start printing right out of the box!
OFFLINE PRINTING: Insert an SD card with a print file, press the print button and your design begins to take shape. Without connection problems. Easy to print.
Printing at 100 micrometer XY resolution and up to 20 micrometer Z layer thickness, SparkMaker has an amazing ability to print in higher resolution compared to DLP 3D printers.
WORRY-FREE WARRANTY: Unconditional return, if in case you have any question please feel free to contact us, we will be able to reply your any product issue within 24 hours.