●With PTFE in hot regions of our HotEnd we will be able to succeed in 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (would possibly require additional electronics) you’ll succeed in over 280C.
●This now not simplest permits you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but additionally gets rid of HotEnd meltdown screw ups associated . recent v6 hotend has a PTFE liner within the hotend this liner is never subjected to high temperatures so there is not any risk of damaging the lining through overheating.
●Our new HeaterBlock gives the fastest heat up times and essentially the most responsive temperature keep an eye on by clamping across the cartridge for maximum thermal contact. The brand new thermistor placement means you get essentially the most accurate temperature readings with the fastest response. What This implies for you the user is that you’ll go from 20C to 200C in just 65 seconds, temperature keep an eye on is responsive enough that you’ll keep the hotend within 0.5C of your set temperature or less with ease.
Reduced Bulk and Z-Height.
About Volcano kit:
●1 pcs Volcano Heating block.
●4 pcs long nozzles(1.75mm/0.6mm,0.8mm ,1mm,1.2mm)
●We have now curious about cutting as much bulk from the V6 as imaginable. This implies an overall length of just 72mm and significant reductions in bulk within the X/Y dimensions by the use of our new injection moulded fan duct.
●1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
●1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S
●1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
●1 x Pneumatic Straight Fitting to hook up with extruder cold end
●1 x Volcano Heating block
●4 x long nozzles
●2 x Throat with Teflon Tube(GIFT)
●1 x 0.3mm Nozzle,1 x 0.4mm Nozzle,1 x 0.5mm Nozzle(GIFT)
The bowden tube may also be got rid of for use for an instantaneous drive extruder
RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-stressed thermistor
Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.